TPMS Tire Pressure Sensor 4PCS 433MHZ for Hyundai Ix55 I30

Key Features

• Four-Sensor Set — The set has four sensors, so all tire pressure monitors can be replaced at once for consistent readings.
• Pre-Programmed Sensors — They are pre-programmed for specific Hyundai and Kia models, so manual programming is not needed.
• 433MHz Frequency — The sensors operate at 433MHz to match the TPMS system of the supported vehicles.
• Factory Tested — Each sensor is factory tested before shipping.

Product Specifications

• Piece Count: 4PCS
• Operating Frequency: 433MHZ
• Battery Life: Approximately 3 to 5 Years
• Part Numbers: 52933-3N100, 52933-2M650, 52933-B1100, 52933-A5100, 52933-2J100, 52933-2M600
• Compatible models: Hyundai Genesis Coupe Santa Fe Kia

What It Is / How It Works

These are four tire pressure monitoring sensors (TPMS) for replacing worn or failing units on Hyundai and Kia vehicles. They operate at 433MHz and come pre-programmed for specific models.

Who It's For / Use Cases

TPMS sensors suit drivers whose tire pressure warning light has come on or whose existing sensors have worn out or are failing. They also suit owners who have a TPMS scan tool or OBDII relearn tool and want to save on labor costs, as well as anyone who prefers to have a tire shop handle the fitting.

How to Use / Care

1. Have a trained professional or tire shop remove the tire from the wheel and fit the sensors.
2. After installation, activate the sensors with a TPMS scan tool or complete the relearn procedure with an OBDII tool.
3. If the TPMS light stays on, confirm the sensors were activated with a scan tool and that the relearn was completed correctly.

How to Choose

Start by comparing the part numbers in Product Specifications with your original sensor. The sensors are pre-programmed for specific Hyundai and Kia models, so the vehicle and model year matter. Choose this set when you need all four tire pressure sensors replaced at once.

Frequently Asked Questions

How do I know if these sensors fit my car?
Compare the part numbers in Product Specifications with your original sensor. You can also verify compatibility using your vehicle's VIN code or the car model and year.

Do I need to program these sensors before installation?
No. They come pre-programmed for your vehicle and need activation with a TPMS scan tool or an OBDII relearn procedure after installation.

How long does the battery last?
The built-in battery lasts approximately 3 to 5 years under normal driving conditions.

Can I install these sensors myself?
Installation requires removing the tire from the wheel, so a trained professional or tire shop is recommended.

What should I do if the TPMS light stays on after installation?
Confirm the sensors were activated with a scan tool. If the light stays on, check that the sensors match your vehicle and that the relearn was completed correctly.